HID EDGE EVO Solo User Guide - Manual (Page 42)

Utilities
38
NOTE: The restore process may take up to an hour to complete.
The restore process uses a backup file that you previously created with your EDGE EVO Solo
data.
NOTE: You must back up your EDGE EVO Solo data before you can restore it. For more infor-
mation, see "Backing Up Your EDGE EVO Solo Data" .
To restore your data:
1. Click Browse to navigate to the backup file on your hard drive or a network drive.
2. Select the backup file and click Open.
3. Click Restore Now.
• The management console page will notify you when the process is complete.
• You must log in again to continue working with the EDGE EVO Solo management console.
Updating Firmware
Periodically, updates to your EDGE EVO Solo firmware may be available. Firmware is the “soft-
ware” inside the EDGE EVO Solo that makes it work.
The email message will include a link to download the file from a web site.
To update your firmware:
1. In the Firmware Update area, click Browse to navigate to the update file.
2. Select the update file and click Open.
3. Click Update Now.
• The update can take up to seven minutes to complete.
• The management console page will close.
4. Use the EDGE EVO Solo Jumpstart to access the EDGE EVO Solo management console and
log in again.
• For more information, see "Accessing the EDGE EVO Solo Management Console" .
Updating Hi-O Module Firmware