HID EDGE EVO Solo User Guide - Manual (Page 32)

Cards/PINs
28
3. In the Card Number field, enter the number of the card you want to add.
• The card number may be printed on the back of the card. You can use the cross reference
list that came in the box of cards to help determine which number is the unique card number.
• You cannot edit the card number after you save this card. If you find an error in the card
number, you must delete the card and add the card again.
4. If a Card with PIN reader is installed, enter a PIN.
• Leave the PIN field blank if a PIN is not required.
• A PIN used with a card has a minimun of 4 and a maximum of 8 digits.
5. Select the expiration option for this card:
• No—This card will not expire.
• Yes, expires on—This card will expire and no longer work after midnight on the date selected.
Select the expiration date you want.
6. Click Save.
Adding a Card by Swiping It
You can add one or more cards by swiping them. Using this method, the system automatically
captures the card number.
To add a card by swiping it:
1. At the card reader, swipe the card.
2. Access the management console.
• For more information, see "Accessing the EDGE EVO Solo Management Console" .
3. In the Recent Events list on the left side of the page, click the Add text link next to the first
message that says: Deny Access: Card Not Found.
• The event displays a few seconds after you swipe the card.
• The Add Card page displays, with the card number filled in. The card format should be au-
tomatically set to Raw Hexadecimal.
4. Select the expiration option for this card:
• No—This card will not expire.
• Yes, expires on—This card will expire and no longer work after midnight on the date selected.
Select the expiration date you want.
5. Click Save.