Vertx installation worksheet – HID VertX V100, V200, V300, V1000, and V2000 Installation Guide User Manual
Page 23
December 2010
Page A1
2003 - 2010 © HID Corporation. All rights reserved.
VertX Installation Worksheet
VertX Installation Worksheet
This installation worksheet is provided for you to have a historical record of your system settings. Complete
each appropriate field, and keep this worksheet in a safe location.
Record if the input is wired: 1) N/O or N/C, 2) Unsupervised or Supervised (resistor values), and 3) what
type of device is attached.
Record if output is wired: 1) N/O or N/C and 2) what type of device is attached.
V1000/V2000 Information:
Customer Name:
Contact:
Installed Location:
MAC Address:
Modem Model:
RS232 Port #:
Phone #:
Hostname: IP
Address:
Tamper:
AC Fail:
BATT Fail:
Input 1:
Input 2:
Relay 1:
Relay 2:
V100-Series Information (If V2000, there is a V100 at Interface Address 0 built-in):
Interface Address: (0-31)
Interface Type:
(V100, V200, V300, V2000)
Tamper:
AC Fail:
BATT Fail:
Reader 1:
Reader 2:
Door Switch 1:
REX 1:
Door Switch 2:
REX 2
Strike Relay 1:
Aux Relay 1:
Strike Relay 2:
Aux Relay 2:
Input 1:
Input 2:
Input 3:
Input 4:
Input 5:
Input 6:
Input 7:
Input 8:
Input 9:
Input 10:
Input 11:
Input 12:
Input 13:
Input 14:
Input 15:
Input 16:
Relay 1:
Relay 2:
Relay 1:
Relay 2:
Relay 3:
Relay 4:
Relay 5:
Relay 6:
Relay 7:
Relay 8:
Relay 9:
Relay 10:
Relay 11:
Relay 12:
Input 1:
Input 2:
Reader
Interface
V100 Door /
V200 Input
Monitor
Interface
V300 Output
Control
Interface