HID VertX V100, V200, V300, V1000, and V2000 Installation Guide - Manual (Page 21)

VertX Installation Guide
Configuration Checklist - Static and Modem
Ensure that the Configuration checklist contents are provided prior to installing a VertX controller with Static TCP/IP or
Modem configuration. Note: Advanced setting requirements are shown in gray.
Contact
Name Email Phone Number
IT contact
Sales / PM
Hardware
Name Source Part Number
Ethernet Cable
Computer with Web Browser
Hub (Optional)
Modem (Optional)
VertX Modem Cable (Optional) HID 70007
AC Electrical Outlet or Surge Protector (Optional)
Configuration Data
Connection Type Network (DHCP/Static), Modem, Network with Modem
VertX IP Address . . .
Subnet Mask . . .
Default Gateway . . .
Primary DNS Server . . .
Secondary DNS Server . . .
Network Broadcast . . .
Domain Name
VertX Host Name
FTP Enabled Yes No
Telnet Enabled Yes No
Virtual Port Enabled Yes No
Host Addressing (IP Address or Host Name) . . . OR
Here I Am Interval (sec)
TCP/IP Connection Port
TCP/IP Listen Port
Login Password
Modem
Modem Type
Incoming Mode
Host Phone Number - -
VertX RS-232 Port 1 or 2
Modem Host (IP Address or Host Name) . . . OR
December 2010 Page 21 of 24
© 2003 - 2010 HID Global Corporation. All rights reserved.