HID Hi-O iCLASS Installation Guide - Manual (Page 13)

iCLASS OEM75 Integration Guide, 3141-907, Rev. B.0
January 2014 Page 13 of 49
HID GLOBAL CONFIDENTIAL AND/OR PROPRIETARY INFORMATION. This document contains confidential and/or proprietary
information, which may not be duplicated, published, disseminated or disclosed, or used for any purpose, without the written
consent of HID Global Corporation. If you are an unintended recipient of this information or are unwilling to accept the above
restrictions, please immediately return this document to HID Global Corporation, 15370 Barranca Pkwy, Irvine, CA 92618-3106.
4.2 OEM75 Module – 3141ADx
Figure 4-2: OEM75 – 3141ADx
The OEM75 – 3141ADx was designed to be the smallest form factor possible. This module offering
was designed to be header mounted on a host board utilizing the P1 and P2 connectors.
Note: The 20mil P1 and P2 holes can accept 26 AWG (0.41 mm, 0.13 mm
2 ) or 28 AWG (0.33 mm,
0.08 mm 2 ) wires.