elektraLite CP100xt Manual Part Two - Manual (Page 96)

96
no need to press Enter. Also, this clears the cue editor, even if Solo is off.
Edit Chase
Edit Chase n
These stop any running chase in the chase editor, and reload the current chase, or load a specific
chase. The latter is an alias for Chase n.
Edit Cue
Edit Cue n.n …
These reload the current cue, or load specific cues, into the cue editor, without doing a timed
crossfade. Unlike the Cue commands, these always clear the cue editor first, even if
Solo is off.
Edit Dimmer
Edit Dimmer n
These switch to the EDIT DIMMER display. The second selects a specific dimmer.
Edit Fixture
Edit Fixture n
These switch to the EDIT FIXTURE display. The second selects a specific fixture.
Edit Go
This loads the next higher-numbered cue into the cue editor, without doing a timed crossfade. There is
no need to press Enter. Also, this clears the cue editor, even if Solo is off.
Edit Macro
Edit Macro n
These stop any running macro in the macro editor, and reload the current macro, or load a specific
macro. The latter is an alias for Macro n.
Edit Preset
Edit Preset n …
These copy the current preset, or specific presets, into the cue editor as though they were cues. Unlike
the Preset commands, these always clear the cue editor first, even if Solo is off, and they don't
crossfade.
Feature n … @ -n
This sets the specific features of the currently selected fixtures to a specific value. If the FIXTURE
FEATURES or GROUP FEATURES display is selected and thresholds are selected, this sets the
thresholds instead of the values. If a different display is selected, this always sets the values without
affecting the thresholds.
Feature Preset
This switches to the FEATURE PRESETS display.
Feature Preset n
This selects a specific feature preset, and switches to the FEATURE PRESETS display.
Fixture
This switches to the FIXTURE FEATURES or GROUP FEATURES display for the currently