elektraLite CP100xt Manual Part Two - Manual (Page 82)

82
numbered one through eight. It does the same thing as Add Feature n …, except that it refers to the
features by the rotaries they are connected to, which may be offset by a multiple of eight for a
complex fixture. An error results if the rotaries are connected to dimmers.
Add Stage Focus [To] All [Fixture]
This turns on Stage Focus for all fixtures in the cue editor that support it. It is an alias for
Add All Stage Focus.
Add Stage Focus [To] [Fixture]
This turns on Stage Focus for the selected fixtures in the cue editor. It does not add any fixtures to the
cue editor, but only affects fixtures already present in the cue editor.
Add Stage Focus [To] [Fixture] n …
Add Stage Focus [To] [Fixture] Group
Add Stage Focus [To] [Fixture] Group n …
These select specific fixtures, the fixtures within the current group, or fixtures within specific groups,
and then turn on Stage Focus for them. They do not add any fixtures to the cue editor, but only affect
fixtures already present in the cue editor.
Add Step
This adds an empty step to the end of the chase editor.
Add Step n
This inserts an empty step into the chase editor. If it conflicts with an existing step number, it and any
higher numbered steps are moved up. It can be no more than one higher than the number of steps
already in the chase.
All Chase Stop
This stops all chases in the system, including in the chase editor, in the macro editor, and in
submasters. If macro recording is on, this records a Stop Chase event, which will stop any chases
played by the macro during playback. (Note that this command is executed as soon as Stop is
pressed.)
All Delete
After asking for confirmation, this deletes the entire non-volatile memory, which includes both show
objects and equipment objects.
All Dimmer @ n
All Dimmer @ Full
These set all dimmers that are currently part of the cue editor to a specific brightness, or to full
brightness.
All Macro Stop
This stops all macros in the system, including in the macro editor and in submasters. (Note that this
command is executed as soon as Stop is pressed.)
All Submaster Stop
This stop all running submasters. If they contain cues with nonzero fade-out times, the cues fade out.
Chase