Allied Telesis AT-S26 - Manual (Page 88)

Configuring the MAC Address Table
88
6. In the VLAN Name field, specify the VLAN to which the port belongs.
The default is Default VLAN.
7. In the MAC Address field, enter the static MAC address of the device
to have access to the port.
The address should be entered in the following format:
XXXXXX XXXXXX
You can configure only one static MAC address per port.
A confirmation screen is displayed.
8. Press .
The address is added to the static MAC address table.
9. Return to the Main Menu.
10. If desired, perform the procedure Displaying the Static MAC
Address Table on page 86 to view the updated table.
Deleting
Addresses from
the Static MAC
Address Table
To delete an address from the static MAC address table, perform the
following procedure:
1. From the Omega Main Menu, select MAC Address Table.
The MAC Address Table menu in Figure 30 is displayed.
2. Select Per port static MAC addresses.
A list of the ports on the switch is displayed.
3. Select the port containing the static MAC address to be deleted.
The window in Figure 36 on page 87 is displayed.
4. Select Delete MAC address.
The window in Figure 38 is displayed. You use this window to specify
the static MAC address to be deleted.
Figure 38 Deleting a Static MAC Address Window
MAC Addresses
MAC Address VLAN MAC Address VLAN
00A0D2 18180B Default VLAN
VLAN Name: Default VLAN
MAC address: Null (not configured)
Return to Add MAC Address Menu ...