Allied Telesis AT-S26 - Manual (Page 115)

AT-S26 Version 2.0.1 User’s Guide
115
Assigning the CPU Management Port to a VLAN
This section contains the procedure for assigning the CPU management
port to a VLAN. By default, the CPU management port is assigned to the
Default VLAN.
Note
This procedure should be performed with caution. The CPU
management port must be assigned to the same VLAN that contains
the ports on the switch to which your remote management stations
are connected. Assigning the CPU management port to a VLAN that
does not contain the ports for your remote management stations
will prevent you from being able to manage the switch remotely.
1. From the Omega Main Menu, select Virtual LANs/QoS.
The Virtual LAN/QoS menu in Figure 44 is displayed.
2. Select Assign Management Port to VLAN.
The following prompt is displayed:
3. In the Management Port VLAN field, enter the VLAN ID number of the
VLAN to which you want to assign the CPU management port. The
default is the Default VLAN (VLAN ID 1).
4. Return to the Main Menu.
Assign Management Port To VLAN
NOTE: Input port must be on the same VLAN as the Management
port or the management connection will be lost.
Management Port VLAN: 1
Return to Virtual LAN Menu ...