Allied Telesis AT-S26 - Manual (Page 111)

AT-S26 Version 2.0.1 User’s Guide
111
Modifying a Port-based or Tagged VLAN
This procedure explains how to add or delete ports from an existing
port-based or tagged VLAN. You can also change a port from untagged
to tagged, or vice versa.
To modify a VLAN, perform the following procedures.
Phase 1
1. From the Omega Main Menu, select Virtual LANs/QoS.
The Virtual LAN/QoS menu shown in Figure 44 on page 102 is
displayed.
2. Select Virtual LAN definitions.
The VLAN window shown in Figure 45 on page 103 is displayed. The
window lists the current VLANs in the switch, along with the tagged
and untagged ports that are members of the VLANs.
3. Select the name of the VLAN to be modified.
The VLAN Configuration window for the selected VLAN is displayed.
An example is shown in Figure 47 on page 105.
4. Select the All Ports on VLAN field and enter the revised port list for the
VLAN. Press .
This field must specify both the untagged ports and the tagged ports,
if any.
5. Select the Tagged Ports on VLAN field and enter the revised port list
for the VLAN if you want to specify tagged ports. Press .
If the VLAN already contains tagged ports and you want to remove
the tagged ports and not assign new tagged ports, enter a space in
this field and press .
The changes to the port assignments to the VLAN are activated
immediately. Ports removed from the VLAN are returned to the
Default VLAN.
6. Return to the Main Menu.