Allied Telesis AT-S26 - Manual (Page 75)

AT-S26 Version 2.0.1 User’s Guide
75
2. Select Enabled.
The window in Figure 27 is displayed.
Figure 27 Source and Destination Port Mirror Prompts
3. Select Source Port.
A window displays listing the ports on the switch.
4. Select the port to be monitored.
5. If you are running a web-based Omega session, return to the window
containing the prompts in Figure 27.
6. Select Destination Port.
Again, a window is displayed listing the ports on the switch.
7. Select the port where the network analyzer will be connected.
The two ports are now configured for port mirroring.
8. Return to the Main Menu.
9. Connect a device, such as a network analyzer, to the destination port
or use a remote monitoring program to view the mirrored traffic.
Disabling Port
Mirroring
To disable port mirroring on the switch, perform the following
procedure:
1. From the Omega Main Menu, select Traffic/Port Mirroring.
The Port Mirroring window in Figure 26 is displayed.
2. Select Disabled.
The port mirroring feature is now disabled on the switch.
3. Return to the Main Menu.
Port Mirroring Configuration
Port mirroring state:
> Enabled
Disabled
Source port: Null (not configured)
Destination port: Null (not configured)
Note: Both transmit and receive activity will be mirrored.
Return to Main Menu ...