Allied Telesis AT-S26 - Manual (Page 73)

AT-S26 Version 2.0.1 User’s Guide
73
7. Return to the Main Menu.
8. Connect the port trunks on the switch to the end device, being sure
to follow the guidelines discussed earlier in this chapter.
Deleting a Port
Trunk
To delete a port trunk, perform the following procedure.
1. Disconnect the cables from the port trunk on the switch.
Caution
Disconnect the cables from the port trunk on the switch before you
delete the port trunk. Deleting the trunk before you have
disconnected the cables will create data loops in your network.
2. From the Omega Main Menu, select System configuration.
The System Configuration menu is displayed.
3. Select System switch configuration.
The System switch configuration menu in Figure 16 on page 51 is
displayed.
4. Select Port Trunking in the 10/100M Speed Port.
5. Do one of the following:
Web-based Omega session: Delete the port numbers and select Enter
or press .
Local Omega session: Enter a space in place of the port numbers and
press Enter.
The port trunk is now deleted.
6. Return to the Main Menu.
7. To confirm the deletion of a port trunk, select Port status and
configuration from the Omega main menu to display a list of ports.
The label “Trunk” should no longer appear next to the ports of the
port trunk.