Allied Telesis AT-S26 - Manual (Page 83)

AT-S26 Version 2.0.1 User’s Guide
83
The table lists each MAC address that the switch has learned, the
number or name of the port on which the MAC address was detected,
and the VLAN to which the port belongs.
The Refresh button queries the switch for the latest MAC address
information and updates the window.
3. Return to the Main Menu.
Displaying the
MAC Addresses
of a Port
In addition to displaying all of the MAC addresses stored in the switch,
you can also display the MAC addresses associated with a specific port.
This allows you to easily determine the MAC addresses of the devices
connected to a port on the switch.
To display the MAC addresses of the devices connected to a port on the
switch, perform the following procedure:
1. From the Omega Main Menu, select MAC Address Table.
The MAC Address menu shown in Figure 30 is displayed.
2. Select By port MAC addresses.
A list of the ports on the switch is displayed.
3. Select the desired port number from the list.
The MAC Address Table Per Port window is displayed. The window
contains the MAC addresses that have been detected on the selected
port. Figure 32 is an example of the window.
Figure 32 MAC Address Table Per Port Window
4. Return to the Main Menu.
MAC Address Table
Port 5
MAC Addresses
MAC Address VLAN MAC Address VLAN
00000C 4ACA6B Default VLAN 00000C 938CD9 Default VLAN
0000F4 A23192 Default VLAN 0000F4 A40F4B Default VLAN
0000F4 A411A0 Default VLAN 0000F4 A411AD Default VLAN
Return to Port Selection Menu ...