Allied Telesis AT-VIEW PLUS 3.0 DEVICE MANAGEMENT - Manual (Page 72)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGEMENT
AT-8400 Line Cards
This section describes the AT-8400 Line Cards supported by AT-View Plus Device Manager. If line
cards are installed on the AT-8400 chassis at the time AT-View Plus Device Manager is called, they
will be displayed in their corresponding slots on the chassis image.
• AT-8411
• AT-8412
• AT-8413
• AT-8414
AT-8411
AT-8411
LED State Description
DUPLEX Green
Orange
The port is operating in full-duplex.
The port is operating in half-duplex.
Note - When a port on the AT-8411 line card is configured to auto-negotiate and is connected to a
10/100 Mbps full-duplex port on another device, the current firmware version returns the value 'half-
duplex' for the Port Duplex Status parameter. As a result, the Duplex LED turns orange instead of
green.
PN 613-50665 Rev A Page 72 of 257