Allied Telesis AT-VIEW PLUS 3.0 DEVICE MANAGEMENT - Manual (Page 236)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGEMENT
Port Menu
From the Port menu, you can view MIB information about the ethernet and voice ports.
Interface Info
Ethernet
Displays information for each ethernet port.
Note - The current firm
Port Domain
ware version returns 'not available' for the following
parameters:
Port Link State
Port Type
Port Speed
Port Duplex Mode
Port Autonegotiation State
Voice
Displays information for each voice port. Information displayed will vary depending
on the protocol used : H.323, Media Gateway Control (MGCP), or Session Initiation
(SIP).
Note - H.323 : The Port Capability parameter does not display all capabilities used
during call setup.
Note - MGCP : The current firmware version returns 'deleted' for the Port State
parameter even if an MGCP port has already been created.
Note - MGCP : The current firmware version returns 'data -> '
instead of actual values for the following parameters:
Port Operational State
Port Type
Port Profile
Port End Point Identifier
Port Package
Port Call Agent
Port Notified Entity
Port Digit Map
Port Network Loss Rate
Note - MGCP : The current firmware version returns '0' instead of actual values for
the following parameters:
PN 613-50665 Rev A Page 236 of 257