Allied Telesis AT-VIEW PLUS 3.0 DEVICE MANAGEMENT User Manual

Page 102

Text mode
Original mode

Allied Telesyn

AT-VIEW PLUS

DEVICE MANAGEMENT

of the ports. For ports 1 to 3, the Administration Status parameter cannot be configured. Its
value is fixed to 'up'. For ports 5 to 12, valid MIB Set values for the Administration Status
parameter are 'up' and 'down'. Attempting to set this parameter to any other value will result
in the error message: "The error occurred with 'Set' operation. Error: bad value."

Note

- The Administration Status parameter always returns to its default value whenever the

device is restarted.

Error Statistics

Displays error statistics for the port.

Note

- The current firmware version returns 'noSuchName' for the Ethernet Chip Set

parameter.

AT-AR200E

PN 613-50665 Rev A

Page 102 of 257