Allied Telesis AT-VIEW PLUS 3.0 DEVICE MANAGEMENT - Manual (Page 228)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGEMENT
Power Info
Displays power supply voltage information.
Battery Voltage
Displays the battery voltage information.
Omega
Displays Omega management interface information, including time-out and port status (RS-
232 and 10Base-T).
Telnet
Starts a Telnet connection to the chassis.
Status Menu
From the Status Menu, you can view and edit information about PowerBlade Modules installed on
the chassis. Options to view all/per module information are displayed.
Note - The current firmware version does not allow the Module Name parameter to be set to NULL.
Attempting to set this parameter to NULL will only set it to its default value.
Note - The Module Type parameter returns 0 for the management module (19), main power supply
(20), and optional redundant power supply (21).
Note - The same set of parameters is displayed for each module regardless of whether or not each
parameter is applicable to the module.
PowerBlade
PN 613-50665 Rev A Page 228 of 257