Agent menu – Allied Telesis AT-VIEW PLUS 3.0 DEVICE MANAGEMENT User Manual
Page 67
Allied Telesyn
AT-VIEW PLUS
DEVICE MANAGEMENT
is not a member of an enhanced stack.
RPS
Green
Gray
The switch is receiving power from the redundant power supply
(PWR B).
The switch is receiving power from the main power supply (PWR
A).
PWR
Green
Gray (Only if
RPS is installed)
The switch is receiving power from the main power supply (PWR
A).
The main power supply is not functioning.
Note
for the operations and behavior of the line cards installed
on the chassis.
Note
- The FAN A and FAN B LEDs are always green regardless of whether or not fan trays are
actually installed.
Note
- The PWR LED is always green and the RPS LED is always gray regardless of whether the
switch is receiving power from the main power supply or the redundant power supply.
Note
- Some parameters, when configured, may at times cause a temporary loss of connection. When
this happens, the following error message appears: "The error occurred with 'Set' operation. Error:
time out occurred.". This will not affect the application in any way.
Agent Menu
From the Agent menu, you can view and edit the system information for the device, or log into the
CLI using Telnet.
System Info
Displays basic system information, including system name, location, contact and description.
Network Info
Displays network-related information such as the addresses of the default gateway and the
agents.
Note
- The current firmware version does not allow the DNS Server and Default Domain
Name parameters to be configured. Attempting to configure these parameters will result in
the error message: "The error occurred with 'Set' operation. Error: gen Error.".
Chassis Info
Displays chassis information including the firmware information.
PN 613-50665 Rev A
Page 67 of 257