Allied Telesis AT-VIEW PLUS 3.0 DEVICE MANAGEMENT - Manual (Page 235)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGEMENT
Agent Menu
From the Agent menu, you can view the system information for the device, or log into the CLI using
Telnet.
System Info
Displays basic system information, including system name, location, contact and description.
Note - The current firmware version does not allow the following parameters to be
configured:
• System Name
• System Location
• System Contact
Attempting to configure these parameters will result in the error message: "The error occured
with 'Set' operation. Error: time out occured."
Device Info
Displays device information such as the application version and hardware version.
IP Interface Info
Displays network-related information such as the addresses of the default gateway and the
agents.
Configuration File List
Displays a list of all configuration files available in non-volatile memory.
Telnet
Starts a Telnet connection to the residential gateway.
RTC Menu
From the RTC menu, you can view all information related to Network Time Protocol (NTP) and
Real Time Clock (RTC).
RTC Info
Displays RTC status information including current time, offset, last update, and last delta.
NTP Server Info
Displays a list of all NTP servers available.
PN 613-50665 Rev A Page 235 of 257