Allied Telesis AT-VIEW PLUS 3.0 DEVICE MANAGEMENT - Manual (Page 244)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGEMENT
e parameter are in the range [0-
65535] inclusive. Setting this parameter to a valid or invalid value always results in the error
message: "The error occurred with 'Set' operation. Error: commit Failed."
VLAN Info
Displays the VLAN table.
eter is '???(0)(???(0))'.
Note - AT-RG634A: Valid MIB Set values for the Leave Tim
Note - AT-RG634A: The value displayed for the RTCP Status param
Group Info
Displays a list of all group multicast address.
Server Info
Displays a list of all multicast servers.
Note - The Server Info sub-menu option does not display the correct parameters. Instead, it
displays the sub-menu option name as a parameter with a value of 'noSuchName'.
VoIP Menu
From the VoIP menu, you can view and edit information related to telephony services available on
the residential gateway.
Note - The current firmware version does not provide the information needed by AT-View Plus
Device Manager to support the H.323 and SIP protocols.
Profile Info
Displays information related to admin profile.
DTMF Relay
Displays Dual Tone Multi-Frequency (DTMF) relay status.
Note - AT-RG634A: It may take a while before the actual value for the Status parameter is
displayed. The value '???(0)(???(0))' may initially be displayed while Device Manager is
retrieving the actual value from the device.
Media
Displays information related to media transport.
QoS
Displays Differentiated Service Code Point (DSCP) entries and its QoS priority level.
Note - AT-RG634A: It may take a while before the actual values for DSCP and TOS
parameters are displayed. The value '0' may initially be displayed for both parameters while
Device Manager is retrieving the actual values from the device.
PN 613-50665 Rev A Page 244 of 257