3 regist menu, 4 save polling data, 5 start snapshot – Allied Telesis AlliedView-EMS 3.10 DEVICE MANAGER User Manual
Page 97: Regist menu, Save polling data, Start snapshot

AlliedView™-EMS 3.10 Device Manager User’s Guide
Page 97 of 133
Note
- Calculated values are rounded. For example, Number of Error packets is
usually very small so that calculated value is likely to be zero.
7.2.7.3 Regist Menu
Add this window to the user-defined menu (User Menu).
7.2.7.4 Save Polling Data
This button opens the Polling Data Save dialog box used to save collected data
to a file. Specify the name and format of the file in which the data is saved.
Select a file format from the options below. To start saving the data, click OK.
When you start saving data, the button's label changes to "Saving polled data".
To close the file and stop saving the data, click the "Saving polled data" button.
CSV Format
Save the data in comma-separated values (CSV) format.
TAB Format
Save the data in Tab-separated values (TSV) format.
Note
- Only the values of the collected RMON variables are saved. Values Device
Manager calculates from these collected values are not saved.
7.2.7.5 Start Snapshot
Clicking this button opens the Start Snapshot window. Use this window to
create an image of the graph and tables in the RMON tab panel in HTML
format. Use the 'Browse' button to select the directory or folder where you
want to save the image.
Note
- You can generate an image of the main panel, table data, or charts. The
type of image or device information that you can generate depends on which
menu you opened the Start Snapshot window from. For more information on
the file types created in the Start Snapshot window, see section