Allied Telesis AlliedView-EMS 3.10 DEVICE MANAGER - Manual (Page 24)

3.2.1 System Name
Usually, the System Name is set to a unique descriptive name for identifying the
device. This refers to the MIB object sysName.
Note - SNMPv3: Depending on the READ VIEW access settings of the user name,
there is a possibility that the System Name will not be displayed.
3.2.2 System Location
Usually, the System Location is set to indicate where the device is installed. This
refers to the MIB object sysLocation.
Note - SNMPv3: Depending on the READ VIEW access settings of the user name,
there is a possibility that the System Location will not be displayed.
3.2.3 System Contact
The System Contact is set to indicate the name or phone number of the
contact person for the device. This refers to the MIB object sysContact.
Note - SNMPv3: Depending on the READ VIEW access settings of the user name,
there is a possibility that the System Contact will not be displayed.
3.2.4 System Description
Usually, the System Description is set to to indicate some information about
the device such as model name, software release and version. This refers to the
MIB object sysDescr.
Note - SNMPv3: Depending on the READ VIEW access settings of the user name,
there is a possibility that the System Description will not be displayed.
3.2.5 Status Bar
The status bar is the area at the bottom of the panel window where a brief
description of a highlighted menu option or toolbar button is displayed. The
depressed rectangular area at the right end of the status bar shows the
connection state of Device Manager.
3 Main Window
AlliedView™-EMS 3.10 Device Manager User’s Guide Page 24 of 133