1 starting from castle rock snmpc, Starting from castle rock snmpc – Allied Telesis AlliedView-EMS 3.10 DEVICE MANAGER User Manual

Page 16

Text mode
Original mode

AlliedView™-EMS 3.10 Device Manager User’s Guide

Page 16 of 133

Starting from SNMPc

2.2.1 Starting From Castle Rock SNMPc

To start Device Manager from SNMPc, double-click on a node icon on the map

window. If the node is supported by Device Manager, the main panel of the node
is displayed.

Note that Device Manager and SNMPc run independently of each other, so
exiting SNMPc has no effect on Device Manager. Device Manager continues to
run even after SNMPc stops running. To exit Device Manager, select Exit from
its File menu.

Note

- SNMPv3: In order to start Device Manager in SNMPv3 mode, the node's

Read/Write Access Mode

attribute should be set to SNMP V3 No-Auth, SNMP V3 Auth-

MD5

, SNMP V3 Auth-SHA, SNMP V3 Priv Auth-MD5, or SNMP V3 Priv Auth-SHA, depending

on the SNMPv3 settings configured on the target device.