Allied Telesis AlliedView-EMS 3.10 DEVICE MANAGER - Manual (Page 9)

SNMP Trap community string. This is used when receiving Traps from
agents.
DisplayName
Titlebar string.
UserName
User account name to be used for accessing the MIB. This is required
when using SNMPv3.
SecLevel
Security level that is configured for the User Name. This is required when
using SNMPv3.
AuthProtocol
Authentication protocol that is configured for the User Name. This is
required when using SNMPv3.
AuthPassword
Authentication password that is configured for the User Name. This is
required when using SNMPv3.
PrivProtocol
Privacy protocol that is configured for the User Name. This is required
when using SNMPv3.
PrivPassword
Privacy password that is configured for the User Name. This is required
when using SNMPv3.
TrapVersion
SNMP Trap version to be used.
2.1.2 Target Host
The target host can be specified by entering the IP address of the device or its
host name.
Examples:
devicemanager -TargetHost 172.16.99.123
devicemanager -TargetHost dvcmgrhub
AlliedView™-EMS 3.10 Device Manager User’s Guide Page 9 of 133