Allied Telesis AlliedView-EMS 3.10 DEVICE MANAGER - Manual (Page 10)

2.1.3 SNMP Version
The Device Manager can use SNMPv1, SNMPv2c and SNMPv3. You may specify
a value of 1, 2 or 3. If the SNMP Version is not specified, the default value of 1
(SNMPv1) will be used.
Examples:
devicemanager -TargetHost 172.16.99.123 -SnmpVersion 1
devicemanager -TargetHost 172.16.99.123 -SnmpVersion 2
2.1.4 Get Community
Get Community is an SNMP community string used to get MIB values from the
agent. You must specify the same community string as the one configured on
the target host. If the string is not specified, the default community string
"public" is used.
Examples:
devicemanager -TargetHost 172.16.99.123 -GetCommunity getdvcmgr
devicemanager -TargetHost dvcmgrhub -GetCommunity getdvcmgr
2.1.5 Set Community
Set Community is an SNMP community string used to change the values of the
agent's MIB variables. You must specify the same community string as the one
configured on the target host. If the string is not specified, default community
string "private" is used.
Examples:
devicemanager -TargetHost 172.16.99.123 -SetCommunity setdvcmgr
devicemanager -TargetHost dvcmgrhub -SetCommunity setdvcmgr
2.1.6 Trap Community
Trap Community is an SNMP community string used to receive traps from the
agent. You must specify the same community string as the one configured on
AlliedView™-EMS 3.10 Device Manager User’s Guide Page 10 of 133