Allied Telesis AlliedView-EMS 3.10 DEVICE MANAGER - Manual (Page 13)

devicemanager -TargetHost 172.16.99.123 -SnmpVersion 3
-UserName AlliedView -SecLevel authPriv
-AuthProtocol MD5 -AuthPassword PASS1234
-PrivProtocol DES -PrivPassword PASS5678
devicemanager -TargetHost 172.16.99.123 -SnmpVersion 3
-UserName AlliedView1 -SecLevel authPriv
-AuthProtocol SHA -AuthPassword PASS1236
-PrivProtocol DES -PrivPassword PASS5675
2.1.13 Privacy Password
If you specified 3 (SNMPv3) for the SNMP Version, and your Security Level is
authPriv
, you must specify a Privacy Password that is configured for the User
Account Name on the target host.
Examples:
devicemanager -TargetHost 172.16.99.123 -SnmpVersion 3
-UserName AlliedView -SecLevel authPriv
-AuthProtocol MD5 -AuthPassword PASS1234
-PrivProtocol DES -PrivPassword PASS5678
devicemanager -TargetHost 172.16.99.123 -SnmpVersion 3
-UserName AlliedView1 -SecLevel authPriv
-AuthProtocol SHA -AuthPassword PASS1236
-PrivProtocol DES -PrivPassword PASS5675
2.1.14 Trap Version
The Device Manager can use SNMP v1, v2c, v3 traps or all versions of SNMP
traps. You may specify a value of 1, 2, 3, or 4. If the SNMP Trap Version is not
specified, the default value of 1 (v1) will be used. If the Trap Version is explicitly
defined, the trap will be enabled automatically.
Examples:
devicemanager -TargetHost 172.16.99.123 -TrapVersion 2
devicemanager -TargetHost 172.16.99.123 -SnmpVersion 2 -TrapVersion 4
If you specified 3 (v3) for the SNMP Trap Version, the SNMP Version that must
be specified is SNMPv3 also with additional SNMPv3 parameters. You can also
combined SNMPv3 parameters with any trap versions.
AlliedView™-EMS 3.10 Device Manager User’s Guide Page 13 of 133