Allied Telesis AlliedView-EMS 3.10 DEVICE MANAGER User Manual

Page 61

Text mode
Original mode

Displays MIB variables of your choice in the common GUI window.

Note

- It takes times to get values for many variables. To improve

performance, you can limit the number of variables to be displayed to
about 10. You can further improve performance by increasing the polling
interval when the volume of the data is high.

MIB display

MIB set

Sets a value for the MIB variable. Specify a variable and a value to set.

You must specify the variable with an instance number. For example,
'sysDescr.0' or rptrMonitorPortEntry.1.8' are valid examples. If you
specify a variable without an instance such as 'sysDescr', the set operation

cannot be performed.

Note

- The MIB set operation changes the data structure in the device's

SNMP agent. Take care when using this function.

AlliedView™-EMS 3.10 Device Manager User’s Guide

Page 61 of 133