Samsung SCH-R530RWBMTR - Manual (Page 71)

Ringtones and Keypad Tones
Select incoming call ringtone and vibration, and enable or
disable call vibration and keypad tones.
� From the Call Settings screen, touch Ringtones and
keypad tones. The following options are available:
• Device ringtone: Select the ringtone the phone plays to alert
you of incoming calls.
• Device vibration: Select the vibration pattern the phone uses
to alert you of incoming calls.
• Incoming call vibration: Touch to enable/disable use of the
selected Device vibration. When enabled, a check mark
displays.
• Keytones: Touch to enable/disable playing of DTMF tones
when you enter numbers with the Phone keypad. When
enabled, a check mark displays.
Call Alerts
Set options for sounds and vibrations to occur during calls.
� From the Call Settings screen, touch Call alert. The
following options are available:
• Call vibrations: Configure the conditions in which the phone
vibrates for different call alerts.
– Vibrate on connection to network: The phone vibrates when
it connects to the network.
– Call-end vibration: The phone vibrate when the other caller
ends the call.
• Call status tones: Choose options for sounds to play
during calls.
– Call connect tone: The phone plays a tone when the other
caller answers a call.
– Minute minder: A tone plays once per minute during a call.
– Call end tone: The phone plays a tone when the other caller
ends the call. Touch OK to save the settings.
• Alerts on call: Enable so alarms and new messages play
during phone calls. When disabled, these notifications mute
during a call.
66