Samsung SCH-R530RWBMTR - Manual (Page 153)

Turning Bluetooth On or Off
1. From the Home screen, sweep your finger from the top
of the screen downward to display Notifications.
2. Touch Bluetooth to turn Bluetooth On.
Touch Bluetooth to turn Bluetooth Off.
Pairing with a Bluetooth Device
Search for a Bluetooth device and pair with it, to exchange
information between the phone and the device.
After pairing, the phone and the target device connect with
each other and exchange information without a passcode
or PIN.
Note: When connected, the Bluetooth connected icon
displays in the Status Bar. If you receive a new request
for connection while connected with a Bluetooth
headset, a new Bluetooth icon displays at the left of the
Status bar and Notifications displays the connection
request.
1. Activate the target device’s discoverable mode.
2. Turn on Bluetooth from the phone (see “Turning
Bluetooth On or Off” on page 148). A list of detected
devices displays.
3. From the list of detected devices, touch the target
device the phone attempts to automatically pair with
the target device.
If automatic pairing fails, then follow the prompts to
complete manual pairing:
• Enter a PIN for the target device and touch OK.
Tip: Some devices use a default passcode of 0000. Refer to
the target device’s user manual for more information.
• When prompted to connect with the target device, touch OK to
complete the connection or touch Cancel to retain the
pairing only.
Connecting with a Bluetooth Device
1. From the Home screen, touch Menu ➔ Settings ➔
Bluetooth. The Bluetooth screen displays on the screen.
2. Under Available devices, touch a previously paired
device. The device connects with the phone.
148