Apple Macintosh LC 630 DOS - Manual (Page 69)

3 Choose Preferences from the File menu.
A dialog box appears.
4 Choose your settings as appropriate.
The selection you make for “Interpret non-PostScript as” must match the
type of printer you have specified in the PC environment. If the settings are
mismatched, your printer may produce gibberish. In addition, the PCL option
works only if the printer is set up to accept PCL commands.
The selection you make for “When emulating an Epson printer” determines
how much of a page is available for printing. If you use the option that allows
gaps between pages, configure your application programs to print to a 60-line
page, rather than a 66-line page, or your margins will be off and your pages
will not print correctly.
5 Click OK.
66 lines maximum for Epson: Page sizes greater than 66 lines (standard letter
size paper) are not supported by the Epson driver. Legal and other larger sizes
will be cut off after either 60 or 66 lines, depending on the setting you’ve
chosen. If you find that your printing is clipped at either the top or bottom of
the page, click the No Gaps option.
58 Chapter 5