Apple Macintosh LC 630 DOS - Manual (Page 158)

5 If there are security screws on the vertical plate on the back of the computer, remove
them with a Phillips screwdriver.
6 Unplug the power cord from your computer.
7 Swing the handle out from its storage position. Then grasp the handle and gently but
firmly pull it toward you.
The vertical plate and the logic board to which it’s attached slide all the way
out of the computer.
What you do next depends on the type of equipment you want to install.
If there are security screws, remove both screws from the vertical plate.
147 Installing an Expansion Card or Memory for the PC Environment