Apple Macintosh LC 630 DOS - Manual (Page 135)

4 Follow the instructions that appear on the screen.
If you are using floppy disks, press x-E to eject a disk when necessary.
Note: The MS-DOS installation disks do not include a DOS mouse driver.
A mouse driver for Windows is automatically installed, however, if you install
Microsoft Windows. Mouse drivers for DOS are widely available from third-
party sources.
5 When DOS installation is complete, you may want to install Windows. If you are using
the CD-ROM disc, find and open the file called Windows Series Installation Instruction
Diskette 1 of 6, type A:setup , and press Return.
If you are using floppy disks, insert the disk labeled Windows Series
Installation Instruction Diskette 1 of 6, type
A:setup , and press Return.
The Windows disks and manual are in the same shrink-wrapped package.
You can skip this and the next step if you don’t want to install Windows.
6 Follow the instructions that appear on the screen.
If you are using floppy disks, press x-E to eject a disk when necessary.
The following PC software is now installed:
DOS (directory)
WINDOWS (directory)
COMMAND.COM
AUTOEXEC.BAT
CONFIG.SYS
124 Chapter 8