Apple Macintosh LC 630 DOS User Manual
Page 181
To install Chameleon from Windows:
1
In the Program Manager, choose Run from the File menu.
2
Type
A:\SETUP.
Follow the on-screen instructions and prompts. Near the end of the
installation, you will be asked to respond to a series of dialog boxes. Respond
as follows:
ADD INTERFACE
Click OK.
INTERNET ADDRESS
Enter the address provided by your network administrator or service provider.
SUBNET MASK
Click OK. The software will supply the correct mask.
HOST NAME
Select a name for your client machine.
DOMAIN NAME
Enter the name for your domain name server.
3
Choose Domain Servers from the Services menu.
4
Enter the IP address of the domain name server.
5
Choose Gateway from the Services menu.
6
Enter the IP address of the Internet gateway, if any.
7
Save the settings by pressing Alt-F-S.
If you will be using a dial-up TCP/IP connection, skip to the next section,
“Restarting Windows.” If not, proceed with step 8.
8
Go to the C:\NWCLIENT directory
9
Copy NET.CFG to NET.OLD. (Save a copy of the existing NET.CFG file.)
170
Appendix E