Apple Macintosh LC 630 DOS - Manual (Page 64)

m When using DOSCLIP from within certain application programs, it may
not be possible to select the text using the mouse. In these cases, either use
the keyboard to select your text, or check that the standard DOS mouse
driver is not loaded.
m When the PC environment is active, all Macintosh programs are put in the
background to allow the PC Clipboard to run in the foreground. If you do
not want your Macintosh programs to run in the background while you are
in the PC environment, you must disable the Clipboard translation by
removing the PC Clipboard Extension from the Extensions folder (inside
the System Folder in the Mac OS).
Running network software
The DOS-Compatibility Software on your computer supports any networking
protocols, operating systems, or application programs that are compatible with
Novell’s Open Data-Link Interface specification (ODI).
m To set up the software, install your networking client software in the PC environment.
Networking client software such as Netware is not included with the DOS-
compatible Macintosh.
Compatible and incompatible protocols
You can run NetWare in the PC environment at the same time that you’re
running AppleTalk in the Mac OS.
To use IPX or TCP networking protocols, you must have an Ethernet card
installed in your computer’s communication slot. (The Ethernet card is not a
standard feature.)
You can use the IPX and TCP protocols at the same time in either the PC
environment or the Mac OS, or you can use one protocol in the PC
environment and the other protocol in the Mac OS. However, you cannot
use the same protocol in both environments at the same time.
If you want to use the IPX protocol in the PC environment and you have
installed MacIPX in the Mac OS, remove MacIPX from the Control Panels
folder or select AppleTalk as your network interface in the MacIPX
control panel.
53 Operating in the PC Environment