Campbell Scientific RTMC Pro Real-Time Monitor and Control Professional Software User Manual

Page 68

RTMC Pro

• To check th lock of the C

http://192.1

tml

• To check th

http://192.1

.14/weathe

&URI=Server:CR1000

_ip&format=html

Datalogger

e c

SI Web Server:

68.4.14/weather/?command=clockcheck&format=h

e clock of the CR1000 in the LoggerNet server data source

68.4

r/?command=clockcheck

In this example, you are directly

.168.12.55.

• To check th

ck of the d

http://192.1

2.55/?comm

ClockSet

Sets the time for the station specified by the URI. For the CSI Web Server, a
user name and password that has at least read/write rights must be entered (or
previously entered in the same

Likewise,

for direct datalogger access, if a .csipasswd file has been sent to the datalogger,
a user name and

session) or the c

URI

The URI can be specified as URI=source_name:station_name.
For direct datalogger access, the URI can be omitted.

nd.

With ClockSet, the time returned is

the time before the clock was set.

Code Description

accessing the datalogger at 192

e clo

atalogger:

68.1

and=clockcheck&format=html

session) or the command will fail.

password must be entered (or previously entered in the same
ommand will fail. ClockSet has the following parameters:

Time

The time to set the clock to, in the format of YYYY-MM-DD
T:HH:MM:SS.MS. MS is optional.

Format

The Format is the file format for the result of the comma
Options are HTML, JSON, or XML.

A result code, time, and description are returned for
ClockCheck and ClockSet.

The clock was checked (successful)

The LoggerNet session failed (LoggerNet data
sources only)

Invalid LoggerNet logon (LoggerNet data
sources only)

data sources only)

The clock was set

Blocked by LoggerNet security (LoggerNet