Campbell Scientific RTMC Pro Real-Time Monitor and Control Professional Software - Manual (Page 62)

RTMC Pro
When querying through the CSI Web Server, that data source
is specified as
source_name:station_name.table_name.field_name. (Note the
specified as table_name.field_name. For example, the data
source for the PTemp field in a datalogger's Public table would
be:
he Mode specifies the timeframe for the data to be returned.
Valid options are:
he time
is specified by P1.
since-record – Returns all the records since a certain record
ified using P1.
date
rns all the data that has been stored since a
certain time interval (for instance, all the data since 1 hour
most-recent – The maximum number of records to return.
the data. Format = YYYY-MM-
DD T:HH:MM:SS.MS. Time (T) is optional; if only the date is
cified, Time is assumed as midnight. When specifying time,
is optional.
since-record – The starting record number.
med as
station_name applies only to LoggerNet Server data sources.)
For example, the data source for the PTemp field in a
CR1000's Public table in a LoggerNet Server data source
would be:
Uri=Server:CR1000.Public.PTemp
When querying the datalogger directly, the data source is
Uri=Public.PTemp
Note that field_name is optional. If omitted, all values in the
table will be returned.
Mode T
most-recent – Returns the data from the most recent number of
records. The number of records is specified by P1.
since-time – Returns all the data since a certain time. T
number. The record number is spec
data-range – Returns the data in a certain date range. The
range is specified using P1 and P2.
Backfill – Retu
ago). The interval is specified using P1.
P1/P2 P1 and P2 are used to set the time parameters for Mode:
since-time – The start time for
spe
MS
data-range – The start time (P1) and end time (P2) for the data.
Format = YYYY-MM-DD THH:MM:SS.MS. Time (T) is
optional. If only the date is specified, Time is assu
midnight. When specifying time, MS is optional.
56