Campbell Scientific RTMC Pro Real-Time Monitor and Control Professional Software - Manual (Page 49)

RTMC Pro
Once a project file has been created, the display screen can be run without
s |
e window
run. If
, it will be
time.
n image of the RTMC display screen by
selecting File | Print Screen. A new form to be run is selected under File |
Open Project.
f RTMC Run-time comes with LoggerNet and RTDAQ. For
4. CSI Web Server
The CSI Web Server allows you to view your RTMC projects using a web
browser. Included with the CSI Web Server are the CSI Web Server
Administrator and the Web Publisher. The CSI Web Server Administrator
allows you to configure the web server, check the status of the web server, set
up user accounts and passwords, and easily browse to sites running on the web
server. The Web Publisher allows you to publish your RTMC project to either
a PC website using the CSI Web Server or to an HTTP-enabled datalogger.
The diagram below shows the basic steps in creating your web content.
starting RTMC Pro. From the Windows Start Menu under Program
Campbell Scientific | RTMC click RTMC Run-time. In the run-tim
select File | Open Project to select the RTMC Pro project screen to
Remember Username and Password was not selected in RTMC Pro
necessary to enter them each time the project is run in RTMC Run-
In run-time mode, you can print a
A copy o
LoggerNet, if you want to run RTMC Pro projects on remote computers,
additional copies of RTMC Run-time can be purchased separately. One copy
is required for each computer on which RTMC Run-time will be used. As
noted above, when running RTMC Run-time on a remote computer, the host
computer must have Remote Connections enabled (LoggerNet Toolbar, Tools |
Options | Allow Remote Connections).
Lay Out and Design
Web Pages in
RTMC
Publish Web Files
Using
Web Publisher
Datalogger
Web Server
CSI
Web Server
Web Browser Displays
Interactive Web Pages
43