DAVIS Vantage Pro Console - Manual (Page 5)

:
( / & 20 ( 7 2
9
$1 7 $ *(
3
5 2
Welcome to your Vantage Pro
®
Weather Station console. The console
displays and records your station’s weather data, provides graphing and
alarm functions, and interfaces your weather data to a computer using our
optional WeatherLink software.
Vantage Pro stations are available in two basic versions: Cabled and
Wireless. A Cabled Vantage Pro station transmits outside sensor data from
the Integrated Sensor Suite (ISS) to the console using a standard four-
conductor cable. A Wireless Vantage Pro station transmits outside sensor
data from the ISS to the console via a low-power radio. Wireless stations can
also collect data from the optional Vantage Pro stations listed on page 3.
The Vantage Pro Quick Reference Guide included with your station provides
an easy to use reference for most console functions.
Console Features
Keyboard & Display
The keyboard lets you view current and historical data, set and clear alarms,
change station modes, enter calibration numbers, set up and view graphs,
select sensors, and read the forecast. The keyboard consists of 12
command keys located next to the screen console and four navigation keys
located below the command keys.
A weather variable or console command is printed on each command key.
Just press a key to select the variable or function printed on that key.
Each command key also has a secondary function which is printed above
the key on the console case. To select the secondary function, press and
release the 2ND key (on the front of the console, upper right corner) and
then immediately press the key for that function.