DAVIS Vantage Pro Console - Manual (Page 17)

Setup Mode
may need to use the alternate transmission interval if it is being substituted
for another type of station or because of changes we have made to the
products.
ISS Transmitter ID Settings:
• ISS Station used as an ISS: ISS
• ISS Station used as a Temp/Hum Station: TEMP HUM and 4X
Temperature/Humidity Station Transmitter ID Settings:
• Temp/Hum Stations built before April 2003: TEMP HUM
• Temp/Hum Stations built April 2003 or later: TEMP HUM & “4X.”
• Temp/Hum Stations built before April 2003, used as an ISS station:
ISS & “.25x”
• Temp/Hum Stations built April 2003 or later, used as an ISS station:
ISS
Temperature Station Transmitter ID Settings:
• Temperature Stations built before April 2003: TEMP
• Temperature Stations built in April 2003 or later: TEMP HUM & “4X”.
1. If you have a cabled station, or if you have a wireless station and are
using the default transmitter ID setting, press DONE to move to the next
screen.
Note: Typically, you can use the default transmitter ID setting of unless you are installing one of the
optional transmitter stations or unless a nearby neighbor has a Vantage Pro Station that
uses transmitter ID 1 for the ISS.
2. Press the < and > keys to select the transmitter ID.
When you select a transmitter ID, the ID number is displayed on the
screen as well as the current configuration.
3. Press + or - to toggle console reception of signals from transmitters
using that ID ON and OFF.
4. Press GRAPH to change the type of station assigned to each transmitter
number. Scroll through the station types - ISS, TEMP, HUM,TEMP HUM,
WIND, LEAF, SOIL, LEAF/SOIL and SENSORLINK - until the correct type
appears.
Note: Select SENSORLINK if the transmitter station is a Wireless Weather Monitor II or Wireless
Weather Wizard II weather station.
1