DAVIS Vantage Pro Console - Manual (Page 18)

3. Using Your Weather Station
5. To change the transmission interval for a transmitter station, press and
hold TEMP then press HI/LOW.
The alternate interval for that station type is indicated on the screen:
“.25X” or “4X”.
6. Press DONE to move to the next screen.
Screen 3: Retransmit - Wireless Only
The console can transmit data from the ISS and other outside sensors to
other Vantage Pro consoles or to the Davis Weather Echo and Weather
Echo Plus.
1. Press the +, -, > or STATION key to enable retransmit. The first available
transmitter ID is automatically assigned.
2. Press the + or - key to toggle retransmit ON and OFF.
3. When retransmit has already been enabled, pressing > will change the
transmitter ID used for retransmit.
4. Press DONE to move to the next screen.
Screen 4: Time & Date
The very first time you power-up the console, the time and date are set to
12:00am 1/1 2000. Be sure to enter the correct date and local time.
To change the time and date:
1. Press < and > to select the hour, minute, month, day or year. The selected
time or date setting will blink on and off.
2. To change a setting, press + or - to adjust the value up or down.
2
am