DAVIS Vantage Pro Console - Manual (Page 38)

3. Using Your Weather Station
Setting the Time Alarm
1. Press 2ND then press the ALARM key to enter the alarm mode.
The ALARM and HIGHS icons appear.
2. Press Time, then press 2ND, and then press SET.
The time field will begin blinking.
3. Press < and > to select hours, minutes, or am/pm.
4. Press the + and - keys to change the digit’s value up and down.
5. When you are finished, press DONE to exit Alarm Mode.
Clearing Alarm Settings
1. Press 2ND then press the ALARM key to enter the alarm mode.
The ALARM and HIGHS icons will appear.
2. Select the alarm setting you wish to clear.
3. Press 2ND, then press and hold CLEAR until the setting changes to all
dashes.
You have cleared the alarm setting.
4. When you are finished, press DONE to exit Alarm Mode.
Silencing Alarms
1. Press DONE to silence an alarm.
T ABLE 3-3: V ANTAGE P RO S TATION A LARMS
Variable Alarms
Barometric Pressure Trend
Storm Warning - uses trend value rising rate
Storm Clearing - uses trend value falling rate
Evapotranspiration ET Alarm - uses total ET for the day
Humidity, Inside High and Low
Humidity, Outside High and Low
Dew Point High and Low
Leaf Wetness High and Low
Rain
Flash Flood Alarm - uses current 15 minute rainfall total
24 Hour Rain Alarm - uses current 24 hour rainfall total
Storm Storm Alarm - uses current storm rainfall total
Rain Rate High
Soil Moisture High and Low
Solar Radiation High
Inside Temperature High and Low