DAVIS Vantage Pro Console - Manual (Page 23)

Setup Mode
Screen 13: Rain Season
Because rainy seasons begin and end at different times in different parts of
the world, you must specify the month you wish your yearly rain data to
begin. January is the default.
1. Press + and - to select the month for the start of the rainy season.
2. Press DONE to move to the next screen.
Screen 14: Serial Baud Rate
The console uses the serial port to communicate with a computer. If you are
connecting the console directly to your computer, leave the setting at 19200,
the highest rate for the port. If you’re using a modem, use the highest setting
your modem can handle.
Note: The baud rate setting on your console must match the serial port setting in the software on your
computer. If you are using WeatherLink for Vantage Pro, refer to WeatherLink help for
instructions on setting the serial port baud rate on your computer.
Note: The console must be equipped with a WeatherLink data logger in order to communicate with a
computer.
1. Press + and - to select the baud rate.
Vantage Pro supports baud rates of 1200, 2400, 4800, 9600, 14400, and
19200.
2. You have completed the console setup. To exit Setup Mode, press and
hold DONE until the current weather screen appears.
Serial Port Baud Rate 19200