Table & shelf placement – DAVIS Vantage Pro Console User Manual

Page 13

Console Location

Table & Shelf Placement

The console kickstand can be set to
five different angles providing five dif-
ferent display angles.

1. Lean the kickstand out by pulling on

its top edge.

You’ll see the indentation for your
finger at the top edge of the console.

2. Slide the catch to arrest the kick-

stand in the appropriate angle.

Choose low angles for display on a
coffee table or other low area.
Choose higher angles for display on
a desk or shelf.

3. Pull up on the stand to close it. It will

be a little tight, so it’s okay to push hard enough to get it to slide.

4. Install the two round

rubber feet on the
bottom of the con-
sole.

5. Install the two rubber

channel feet on the kick-
stand.