Important instructions, Compliance, Fcc and iec – AMX UDM-0102 User Manual
Page 6: Date of manufacture, Important instructions compliance
Important Safety Markings
UDM-0102 and UDM-RX02 Operation/Reference Guide
Important Instructions
Compliance
FCC and IEC
Compliance with FCC and IEC standards are found within the rating label; see above.
Date of Manufacture
For US customers, the date of manufacture is also found underneath the UDM-0102 and UDM-RX02.
This symbol, used within this manual, indicates an important instruction for the
correct and safe installation, operation or maintenance of your UDM-0102 and
UDM-RX02.
Failure to comply with such instruction may result in injury to person or damage to the
UDM hardware.
FIG. 3
Date Of Manufacture Sticker (on bottom panel)
UDM-0102/RX02 Date of Manufacture Sticker
Model Number
Model number and designation, comprised of up to seven characters.
Vendor ID
One- or two-character ID code.
Date Code
Three-digit date code, comprised of week of year (1-52) and last digit of year.
Consecutive number
Starting at “0001” and continuing to “9999”.
Model Number
Vendor ID Date Code
(WW/Y)
Consecutive Number
(4 digits)