AMX UDM-0102 - Manual (Page 52)

Configuration
40 UDM-0102 and UDM-RX02 Operation/Reference Guide
Restoring Hub Configuration and Connections on Power Up
To ensure the configuration settings for the Hub are retained each time the hub boots, ensure the Restore
configuration on power up and Restore connections on power up options (at the bottom of the Setup
page) have been enabled (FIG. 50).
Hub Reset
To reset the Hub, Click the Hub reset button (see FIG. 50).
FIG. 50 Restoring configuration on power up
Failure to select the Restore Configuration and Connection options will mean the Hub
configuration and connections will need to be re-configured if the Hub is reset.
A power down of the Hub is required to complete the reset procedure.