AMX UDM-0102 - Manual (Page 26)

UDM-RX02 Multi-Format Receiver
14 UDM-0102 and UDM-RX02 Operation/Reference Guide
Powering On the UDM-RX02
The UDM-RX02 may be powered by its hub device through a standard CAT5 cable, but it may also be
powered through an optional 24 VDC power supply (FG-UDM-PS) intended to augment power for very
long cable runs. To connect the UDM-RX02 to the optional power supply, insert the barrel connector of
the power supply into the power connector on the UDM-RX02 (illustrated in FIG. 1).
To power down the UDM-RX02, remove the barrel connector of the power supply from the power
connector and then remove the Ethernet cable from the UDM Hub connector.
UDM-RX02 Specifications (Cont.)
Audio Connectors: • Black RCA female connector - Digital audio
• White RCA female connector - Analog audio Left
• Red RCA female connector - Analog audio Right
Video Connectors: • Yellow RCA female connector - CVBS (supports composite video)
• S-Video - S-video female connector
• VGA - HD15 female connector (supports VGA video)
• Green RCA female connector - Component output: Y
• Blue RCA female connector - Component output: Pb
• Red RCA female connector - Component output: Pr
Operating Environment: • 35°F - 95°F (5°C - 35°C)
• Max. relative humidity - 85% (non-condensing)
Dimensions (HWD): • 1" x 8 15/16" x 3 3/8” (25 mm x 227 mm x 85 mm)
Weight: • 1.45 lb. (658 g)
Certifications: • CE
• FCC part 15 Class A
Other AMX Equipment: • RS232 DB9/RJ12 Connection Cable (FG-RS01)
• UDM-RC02 Multi-Format IR Remote Control (FG-UDM-RC02)
• IR01 IR Emitter Module (FG-IR01)
• IR03 External IR Receiver Module (FG-IR03)
• UDM-PS 24VDC, 750mA Power Supply (FG-UDM-PS)
As a Class 1 appliance, ensure the device is connected to a main socket outlet with a
protective grounding connection.
Disconnecting the optional power supply will not power down the UDM-RX02 if its
Ethernet connection to the UDM Hub is intact. Remove the CAT5 cable from the
device, powering the unit down then add the power supply and reconnect the CAT5.