AMX UDM-0102 - Manual (Page 34)

Configuration
22 UDM-0102 and UDM-RX02 Operation/Reference Guide
4. On initial connection, the Status page is displayed (FIG. 18).
Status Page
All of the system control is handled using the Status page (FIG. 19). From this page it is possible to
control:
Which input is displayed
Send device control messages to the display device
Create an event for management via the scheduling engine
Click the Status link on the left side of the WebConsole to invoke or return to the main Status page.
Input Configuration
The options on the Inputs page allow you to specify the video types and audio sources being presented to
each input port and where appropriate renaming these.
1. Select the Inputs link at the top of the Status page to invoke the Input Configuration page (FIG. 20).
FIG. 18 Status page (Initial View)
FIG. 19 Status page
FIG. 20 Input Configuration page
Click links to access the four main
areas of the WebConsole
Device Selection
(initial view is Status)
Click to access the three areas
of the Status page