Changing an input, User control – AMX UDM-0102 User Manual
Page 37

Configuration
25
UDM-0102 and UDM-RX02 Operation/Reference Guide
Changing an Input
The input being displayed at a port can be changed at any time. Simply select the new input to be
displayed at this port via the Input drop-down.
User Control
Administrators can issue commands from the UDM WebConsole. These commands can be issued in two
ways (FIG. 26):
The Control drop-down menu from the Status page for the relevant port, or
The User control section from within a selected port (for example, once a port’s hyperlink has
been clicked the User control option will be visible).
FIG. 26
User Control options
Click to access User control
page for the selected Port
Control drop-down menu
Schedules are also used to issue commands at a pre-determined time to inputs and
devices. Refer to the Schedule Page section on page 41 for details.