HP OneView for Red Hat Enterprise Virtualization - Manual (Page 21)

The Server Power table contains (all values in watts):
•
Present Power Reading—Current power being consumed by the host.
•
Average Power Reading—Average measured power reading for the specified time period. If
the server has not been running for the specified time period, the value is the average of all
readings since the server was booted.
•
Minimum Power Reading—Least measured power reading for the specified time period. If the
server has not been running for the specified time period, the value is the minimum reading
since the server was booted.
•
Maximum Power Reading—Highest measured power reading for the specified time period.
If the server has not been running for the specified time period, the value is the highest reading
since the server was booted.
DIMMs
The DIMMs table contains, for each DIMM socket:
•
Socket—Label and location of the DIMM on the motherboard.
•
Size—DIMM capacity in MB.
•
Speed—DIMM speed in MHz.
CPU Information
The CPU Information table contains, for each CPU socket:
•
Socket—Label of the CPU socket.
•
Speed—CPU speed in MHz.
•
Cores—Number of CPU cores and threads in this socket.
•
Memory—Memory architecture of the socket.
Power Supplies (ML/DL only)
The Power Supplies table contains, for each supply:
•
Status—Power status of the power supply (On, Off).
•
Location—Bay in which the power supply is located.
On Gen8 systems, the Power Supply table also contains:
•
Capacity—Total number of watts the power supply can provide.
•
Serial Number—HP power supply serial number.
•
Part Number—HP power supply part number.
•
Spare Part Number—HP power supply spare part number.
Fans (ML/DL only)
The Fans table contains, for each fan:
•
Status—Power status of the fan (On, Off).
•
Zone—general area (zone) within the server chassis that the fan is intended to cool.
•
Location—Fan’s location within the server chassis.
•
Speed—Current fan speed (as a percent of maximum speed).
Temperature Sensors
The Temperature Sensors table contains, for each sensor:
•
Status—current status of the sensor.
•
Zone—General area (zone) where the sensor is located.
Host 21