Navigating to a host – HP OneView for Red Hat Enterprise Virtualization User Manual

Page 11

Text mode
Original mode

Navigating to a host

When you first log into RHEV-M and select the HP OneView tab (1 above), the Welcome tab in
the Global pane appears. This provides a brief overview of how to navigate the UI to see information
for a host that is provided by HP OneView for RHEV.

Figure 2 Welcome tab

To view information about one of your hosts:
1.

Select Hosts from the RHEV-M Resources Tabs.

In the Hosts tab, select a specific host from the list of available hosts.

Select HP OneView in the RHEV-M Details Pane. This will provide access to the Host Information
tabs and Action toolbar corresponding to the host you selected.

NOTE:

Before data can be acquired about a particular host (iLOs/servers, blade enclosures,

and Virtual Connect), it must be “discovered” and communication established using the proper
credentials. The following section explains how to discover hosts.

Navigating to a host